Our experts will be happy to help you.
| Controller | Fanuc |
| Controller Model | Fanuc Series 21i-TB |
| Chip Conveyor | Not Available |
| Number of Turret Tools | 8 |
| Tailstock | Not Available |
| Turning Diameter (mm) | 250 |
| Machining Length (mm) | 307 |
| Spindle Bore Diameter (mm) | 51 |
| Maximum Spindle Speed (RPM) | 4000 |
| X-Axis Travel (mm) | 185 |
| Z-Axis Travel (mm) | 370 |
| Number of Axes | 2 |
The Used Takisawa TC-200 L3 CNC lathe is a compact slant-bed CNC turning machine manufactured in 2004 and equipped with a Fanuc Series 21i-TB control. It was built by Takisawa Machine Tool Co., Ltd. in Okayama, Japan, and carries machine number TBFS73585. The machine is intended for general turning work in machine shops, subcontract machining companies, repair departments and small-series production environments.
The Takisawa TC-200 L3 offers a maximum turning diameter of 250 mm, a swing over bed of 420 mm and a maximum turning length of 307 mm. Axis travels are 185 mm in X and 370 mm in Z. These figures place the machine in the compact turning class, where rigidity, accessibility and short cycle times matter more than large part capacity.
Power comes from a main motor rated 5.5/7.5 kW according to the machine plate, with a maximum spindle speed of 4000 rpm working through a 51 mm spindle bore. Typical workpieces may include shafts, bushes, rings, flanges, pins, couplings, threaded parts and other rotational components used in mechanical engineering, hydraulics and general metalworking production.
The Fanuc Series 21i-TB is a widely used turning control, which means programming knowledge, documentation and service support remain easy to find. For buyers looking for a used CNC lathe that can be integrated into an existing Fanuc-based shop without retraining operators, the Takisawa TC-200 L3 may be a practical option.
The complete specification list for this machine is shown in the technical data table on this product page.
Key figures at a glance: 250 mm maximum turning diameter, 420 mm swing over bed, 307 mm maximum turning length, 51 mm spindle bore, 4000 rpm maximum spindle speed, 5.5/7.5 kW main motor, an 8-station turret, 185 mm X-axis travel and 370 mm Z-axis travel. The year of manufacture is 2004 and the control system is a Fanuc Series 21i-TB.
The machine plate states a supply of 220 V, three phase, 50/60 Hz, 42 A and a maximum power supply of 16.1 kVA, with control voltages of 100 V AC and 24 V DC. Buyers on a 400 V network should plan for a matching transformer. The approximate footprint is 1600 x 1280 x 1890 mm at a weight of around 2800 kg, so installation in an existing workshop layout is normally straightforward.
This Takisawa TC-200 L3 is offered in used condition and is sold as inspected. The photographs on this page show the actual machine in our warehouse, including the paintwork, covers, control panel, data plates and work area, so buyers can form their own view of the general condition before making an enquiry.
The machine is fitted with an 8-station turret. The turret and the tool holders visible in the work-area photographs are included in the sale as shown, and the standard machine guarding and coolant system are also part of the delivery.
An extraction connection is fitted at the rear of the machine, as shown in the photographs, and the original Fanuc Series 21i-TB control unit with its operator panel is complete and undamaged in appearance.
The machine has no chip conveyor, and the spindle nose is shown without a chuck mounted, so chuck size and tooling should be clarified with us before purchase.
The Takisawa TC-200 L3 suits job shops that machine single parts and small batches across a changing mix of drawings. The compact working range, the 51 mm spindle bore and the 8-station turret make it possible to set up a new job quickly and to keep tooling in the machine between orders.
In series production the machine can be used as a second operation lathe or as a dedicated station for one family of parts. The 4000 rpm spindle and the Fanuc 21i-TB control support the feeds and speeds normally used for steel, stainless steel, cast iron, brass, aluminium and free-cutting materials.
Maintenance and repair departments may find the machine useful for producing replacement shafts, bushes, spacers and adapters at short notice, where waiting for an external supplier would cost more than the machine time. The 307 mm turning length covers many common service parts.
Training workshops and technical schools also use machines of this size and control generation, because the Fanuc turning control is close to what students will meet later in industry, while the compact footprint fits into a teaching workshop.
Before delivery we check the machine for completeness and document its condition with current photographs taken in our warehouse. Every figure on this page comes either from the machine plate itself or from manufacturer documentation for the TC-200 series. Differences between published series data and the actual equipment of a used machine are always possible and are clarified during inspection.
We regularly supply customers in Germany, Austria and Switzerland, and on request we also arrange exports elsewhere in Europe and to non-EU countries, including the export paperwork that goes with them.
This machine belongs to our CNC lathe category and is listed on our Takisawa brand page, and is also relevant for buyers searching for used Takisawa machines, Fanuc-controlled turning machines, compact CNC turning centres and used CNC lathes for job shop and subcontract production.
Takisawa Machine Tool Co., Ltd. has built machine tools in Japan since 1922 and is known for rigid slant-bed lathe construction. A used Takisawa TC-200 L3 can therefore offer a level of build quality that would cost considerably more in a comparable new machine, while remaining serviceable with widely available components.
The Fanuc Series 21i-TB control is well documented and widely supported, so spare parts, service technicians and programming know-how are still accessible. This lowers the risk normally associated with buying a used CNC lathe from an older control generation.
The compact footprint and moderate weight keep transport, rigging and installation costs reasonable. For a workshop that needs additional turning capacity without a large capital outlay, this machine may represent a sensible balance between price, capability and running cost.
The machine is available for inspection at our warehouse, and we can arrange a viewing appointment or provide further photographs, video and technical details on request. Contact Maschinentech for the current price, availability, transport options and a delivery quotation for this Takisawa TC-200 L3 CNC lathe.
Request a quote for:
